Method and limitations
uphill.ski is a planning aid. This page says how it works so you can judge how far to trust it.
Terrain
Section titled “Terrain”Elevation comes from Mapterhorn, a global open elevation model (10 m or coarser in many places). Slope and aspect are computed from it in your browser with Horn’s 3×3 method, using the true ground size of each pixel at that latitude. Slopes are degrees; aspect is the direction the slope faces, in degrees clockwise from north.
Release terrain
Section titled “Release terrain”Terrain that can release an avalanche is a slope between the release angle and 60° on a cell whose aspect and elevation band are in the avoided rose: the aspects and bands you or the forecast mark.
Runouts
Section titled “Runouts”With runouts on, avoided areas extend to where an avalanche starting on release terrain would stop. Its reach ends where the travel angle from the release cell drops below an alpha angle.
The forecast
Section titled “The forecast”For US zones, the forecast comes from avalanche.org and is shown with its danger ratings. Its problems are grouped by how they are handled when planning: persistent slabs, new-snow slabs, loose snow, and wet slab, glide and cornice. By default, problems rated likely or worse are avoided, and every aspect where the danger is High. See The forecast and what is avoided for the controls.
- Strict: avoided terrain is impassable.
- Flexible: avoided terrain costs more the higher the danger rating of its elevation band; Extreme stays impassable.
- Off: avoided terrain is ignored.
Runouts have their own Strict, Flexible and Off setting, never stricter than release terrain. A forecast is for a day: when today’s has expired and the next is published, the app opens on tomorrow’s.
Routing
Section titled “Routing”Routes are found with A* over the terrain grid. Uphill legs run on a skinning pace curve (the default follows Munter’s formula) and cap the grade along the direction of travel. Descents run on a fixed ski pace, hold the slope limit to the slope averaged over about 30 m, and pay for skiing off the fall line on steep ground. Skins-off and skins-on transitions are inferred from the routed profile. Mapped trails, forest and where people actually tour (Strava’s backcountry ski and snowshoe heatmap) only change how routes are preferred: they never change what is passable or where avalanches can start.
Data sources and credits
Section titled “Data sources and credits”- Terrain: Mapterhorn. Basemap: OpenFreeMap, © OpenStreetMap contributors. Other basemaps are credited in the map.
- Avalanche forecasts: avalanche.org and the avalanche centers that publish them.
- Heatmap: Strava.
Limitations
Section titled “Limitations”- No snowpack, weather or current conditions. Wind loading, recent avalanche activity and the state of the snow are not modelled. Season history shows a slope’s past forecasts and modelled weather beside the plan, but routing does not use them.
- Elevation resolution. Small features, cornices, cliffs and trees are missed, and forest only makes routes prefer or avoid trees.
- Forecast timing. A forecast is valid for its day and expires; check the date on the card and read the full forecast at the avalanche center.
- Coverage. Forecasts load for US zones; elsewhere you choose the terrain to avoid yourself.
Carry rescue gear, travel with partners who have the training avalanche terrain needs, and make your own decisions in the field.